Delete A Channel; Change Station Channel Position - JVC HR-S7600EU Instructions Manual

Delete A Channel

Perform steps 1 and 2 of "Storing Channels Manually" on
page 50 to access the Confirmation screen before continuing.
SELECT ITEM
1
@ #
Press % fi
until the item you want to delete begins
blinking.
DELETE CHANNEL
2
Press .
The item directly beneath the cancelled one moves
up one line.
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
Change Station Channel
Position
Perform steps 1 and 2 of "Storing Channels Manually" on
page 50 to access the Confirmation screen before continuing.
SELECT ITEM
1 @ #
Press % fi
until the item you want to move begins
blinking. Then press OK and the station name (ID) and
its channel (CH) number begin blinking.
SELECT NEW POSITION
2
@ #
Press % fi
to move the station to the new channel
position, then press OK.
Example: If you moved the station in position 4 to
position 2, the stations originally in positions
2 and 3 each move down one space.
PR CH ID PR
01 25 ARD 08 C26 E-SP
02 C08 SKY1 09
03 10 ZDF 10 C24 SAT1
04 C65 RAI1 11 C23 OSF
05 C31 BBC1 12 C25 ESPN
06 C32 BBC2 13
07 C33 3SAT 14
[ 5 ∞
] : MOVE
: MANUAL CH SET
[MENU] : EXIT
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
NOTE:
The characters available for the station name (ID) are A–Z, 0–9,
*
–, , +, (space) (maximum of 4).
CH ID
PR CH ID PR
01 25 ARD 08
55 WEST 02 C65 RAI1 09
03 C08 SKY1 10
04 10 ZDF 11
05 C31 BBC1 12
– – – –
06 C32 BBC2 13
– – – –
07 C33 3SAT 14
[ 5 ∞ ] : MOVE =
[MENU] : EXIT
When Receiving A
Scrambled Broadcast
SELECT DECODER MODE
1
Set "AV2 SELECT" to "DECODER" (
ACCESS CONFIRMATION
SCREEN
2
Perform steps 1 and 2 of "Storing Channel Manually" on
page 50.
SELECT POSITION
3
Press % fi
ing scrambled programmes, then press OK twice.
CHANGE DECODER SETTING
4
Press
and set it to "ON" by pressing % fi.
RETURN TO CONFIRMATION
SCREEN
5
Press OK.
Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION SCREEN
6
Press MENU.
ATTENTION
If channel positions are changed or deleted, the Guide
Program numbers that have been set are reset.
Example 1: If a channel is deleted, all the Guide Program
CH ID
C26 E-SP
Example 2: If a channel is changed from position 4 to
55 WEST
C24 SAT1
C23 OSF
C25 ESPN
Example 3: If a channel is changed from position 4 to
– – – –
– – – –
* In Examples 2 and 3, if the channel is moved to position
10 before OK is pressed, the Guide Program numbers
above position 10 are reset.
If an attempt is made at timer programming with
S V
HOW IEW
appears; set the Guide Program numbers on this screen.
"ATTENTION – Regarding Guide Program Number
Set" on pg. 27.
Or perform "Guide Program Number Set" (
@ #
to select the channel position broadcast-
#
until "OFF" (decoder setting) begins blinking,
numbers are reset.
position 2, the Guide Program numbers
above position 4 are reset.
position 6, the Guide Program numbers
above position 6 are reset.
in this state, the "GUIDE PROG SET" screen
51
EN
pg. 40).
pg. 58).