Advertisement

Quick Links

90-DAY LIMITED WARRANTY – TYCO® R/C PRODUCTS
Mattel, Inc. warrants to the original consumer purchaser that this product will be free of defects in material and workmanship for ninety (90) days (unless specified in
alternate warranties) from the date of purchase. Mattel will replace the product in the event of such a defect within the warranty period.
In the event of a defect covered under this warranty, first call the toll-free number listed below. Many problems can be solved in this manner. If necessary, you will be
instructed to return the product, postage prepaid and insured, to the address below. Enclose your name, address, dated sales receipt, and a brief explanation of the
defect. Replacement and return shipment will be free of charge.
This warranty does not cover damage resulting from unauthorized modification, accident, misuse or abuse. If the product is returned without a dated sales receipt the
product may be excluded from coverage under this warranty.
Mattel's liability for defects in material and workmanship under this warranty shall be limited to replacement, and in no event shall we be responsible for incidental, con-
sequential, or contingent damages (except in those states that do not allow this exclusion or limitation). This warranty is exclusive, and is made in lieu of any express or
implied warranty. Valid only in U.S.A. This warranty gives you specific legal rights and you may have other rights, which vary from state to state. Some states do not
allow the exclusion of incidental or consequential damages, so the above exclusions or limitations may not apply to you.
TOLL-FREE NUMBER: 1-888-557-TYCO (8926) (valid only in U.S.A.)
Hours: 8:00 A.M. - 5:00 P.M. Eastern Time; Monday - Friday. Expect some delay in January following the holiday season. Please be patient and keep trying the toll-free number.
ADDRESS FOR RETURNS: CONSUMER RELATIONS, 636 GIRARD AVENUE, EAST AURORA, NY 14052
COMPLIANCE WITH FCC REGULATIONS (VALID IN U.S. ONLY)
This device complies with part 15 of the FCC Rules. Operation is
This device generates and uses radio frequency energy and if
subject to the following two conditions: (1) This device may not
not used properly may cause interference to radio and television
cause harmful interference, and (2) this device must accept any
reception. It has been tested and found to comply with the limits
interference received, including interference that may cause
set by the FCC which are designed to provide reasonable protec-
undesired operation.
tion against such interference.
©2003 Mattel, Inc., Mt. Laurel, NJ 08054 U.S.A. PRINTED IN CHINA. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
U.S.A
.
NOTE: Changes or modifications not expressively approved by
the manufacturer responsible for compliance could void the
user's authority to operate the equipment.
Keep these instructions for future reference: they contain important information.
CAUTION-ELECTRIC TOY:
NOT RECOMMENDED
FOR CHILDREN UNDER
8 YEARS OF AGE. AS WITH ALL ELECTRIC PRODUCTS,PRECAUTIONS SHOULD BE
OBSERVED DURING HANDLING AND USE TO PREVENT ELECTRIC SHOCK.
INPUT: 120VAC, 60Hz, 18W. OUTPUT: 15.6VDC, 0.6A, 9.36VA.
CAUTION:
Stay clear of the rotor at all times when
operating this vehicle. Contact with spinning rotor may cause
injury or damage, or may damage the rotor.
B6463-0920

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XFO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Tyco XFO

  • Page 1 TOLL-FREE NUMBER: 1-888-557-TYCO (8926) (valid only in U.S.A.) Hours: 8:00 A.M. - 5:00 P.M. Eastern Time; Monday - Friday. Expect some delay in January following the holiday season. Please be patient and keep trying the toll-free number.
  • Page 2 CHARGE button tant safety information. r LED charge indicators (2): red and green • The XFO™ vehicle is an advanced-tech- nology vertical-takeoff flying machine with 3. Replace battery cover and tighten screw. 3. Wall Charger cool features.
  • Page 3 6. Self-adhesive nosecone label 3. Add the remaining 2 body panels as II. VEHICLE ASSEMBLY shown. Vehicle assembly is a one-time process. It’s easy and fun…just follow the easy steps below. Before you begin: remove all vehicle com- ponents from the package and check them against this list: 1.
  • Page 4 5. Attach the self-adhesive nosecone label NOTE: If the rotor detaches after a landing, • Charge a new Field Charger for at least 16 to the top of the vehicle as shown. Be sure simply reattach it as described in this step. hours before first use.
  • Page 5 2. Plug the Field Charger’s vehicle recharge LED Functions down to activate the stop feature. cord into the vehicle’s power connector as * If the vehicle starts to lift off during the When the CHARGE button is pressed, the shown. The plug is designed to fit one way discharge process, IMMEDIATELY push the Field Charger’s two LED charge indicators only.
  • Page 6 descend, allowing it to move back toward C. Be Careful! 4. To take off, slowly push the transmitter the normal position. DON’T push the control control stick up. To ascend, keep the con- Be a safe pilot…use common sense and stick down to descend –...
  • Page 7 8. Turn the transmitter OFF, then turn the The batteries may explode or leak. • If the vehicle and/or charger get wet, dis- vehicle OFF. Recharge the vehicle for more • Never short-circuit the battery terminals. continue use until they are completely dry. flying action.

Table of Contents