2.3 Host-end Connections
2.3.1 The ACP-2200 provides two types of host connection interfaces:
USB or eSATA. You can switch between them as shown below:
●
Please turn off the pow er supply connected to the ACP-2200 and
disconnect it from the host before sw itching the main unit to USB
or eSATA mode.
●
When the main unit is set to USB mode, it can recognize up to two
devices at the same time.
●
When the main unit is set to eSATA mode, it can only recognize one
device.
Switching between USB/eSATA modes
USB Mode
eSATA Mode
7
ACP-2200 User's Manual