Page 1
BIOVaULT Manual Access Control at the Touch of a Finger...
Page 2
1 YEAR LIMITED WARRANTY The BioVault 2.0™ is guaranteed for one (1) year against manufacturer defects or malfunctions. In the event of failure, Sequiam Biometrics will, at its election, repair, replace or make appropriate adjustment where Sequiam Biometrics inspection discloses any defects occurring in normal usage. To obtain warranty service information please visit biovault.sequiam.com.
GeTTinG STArTed 1. Open the plastic cover on the right side of the BioVault 2.0 shown in Figure A below. 2. To power the unit, either plug in the A/C adapter (included), or insert three D-Cell batteries (not included). To insert the batteries, first turn the battery cap one-quarter turn counter clockwise and pull off.
Page 5
3. Press to turn on the BioVault 2.0, as shown in Figure C. 4. Place your finger over the biometric sensor, as shown in Figure D, and the unit will open. NOTE: If there are no users enrolled on the unit, when opened, it will beep four times to alert the user.
USerS 1. If your BioVault 2.0 is not on, press any key to activate unit. 2. To Enroll the first User: a. Select the Admin feature from the main menu and press the button, as shown in Figure F.
Page 7
The screen will display “2 of 3” indicating that the scanner is ready for the second swipe, repeat Step e (Figure H), then the screen will display “3 of 3” prompting for the final swipe, repeat Step e (Figure H) for a third time. BioVault 2.0 Manual |...
Page 8
BioVault 2.0 should open. NOTE: Please try to open the unit by swiping your finger the same way you originally enrolled to ensure a successful authentication.
Follow steps a - c above. NOTE: When repeatedly opening the unit you must wait for 20 seconds between openings to allow for the BioVault 2.0 to recharge. If you swipe you finger before the unit has recharged it will not open.
NOTE: The user number corresponds to the order the users enrolled. 2. To give a second user admin rights or to revoke away, select Admin press , an administrator must scan their finger to verify admin. a. Select Manage and press | BioVault 2.0 Manual...
Page 11
The user has now been removed. 4. To Erase all the users a. Select Admin and press , an administrator must scan their finger to verify admin rights. b. Select Erase All and press c. All users have now been removed. BioVault 2.0 Manual |...
CHeCKinG BATTerY LeVeL 1. If your BioVault 2.0 is not on, press any key to activate unit. 2. To check the battery level of your unit: a. Select the Battery feature from the main menu and press the button, as shown in Figure P.
TrOUBLeSHOOTinG Help The BioVault 2.0 is a very sophisticated and highly engineered piece of electronic equipment. It has been designed to grant an extremely high level of accuracy in the fingerprint authentication process as well as a high degree of reliability and dependability.
A: Yes, all BioVault 2.0 units are designed to utilize the same wall mounts . Q: Is the BioVault 2.0 fire proof? A: No, the BioVault 2.0 is not fire proof or fire resistant. The BioVault 2.0 has been specifically designed for secure access control and convenience.
Page 15
Q: Can I travel with the BioVault 2.0 through US Customs or TSA Security at the airport? A: Yes, there are no restrictions on carrying this type of item. Please be aware that you may be asked to open the BioVault 2.0 rather than passing it through x-ray...
Page 16
For more great biometric products please visit www.sequiam.com...
Need help?
Do you have a question about the Biovault 2.0 and is the answer not in the manual?
Questions and answers
How do I remove from floor mount?