Buttons, Connectors And Indicators - JVC HR-S2901/2911U Instructions Manual

Buttons, Connectors and
Indicators
Front Panel
Cassette loading slot
VIDEO/AUDIO input
connectors
Display panel
Timer mode indicator
Play indicator
Record indicator
Channel and auxiliary input/Clock time
Rear Panel
AC power cord
Remote
sensor
VCR mode
indicator
S-VHS
indicator
S-VIDEO
Remote
Number keys
On-screen display
If you press OSD (OK) on the Remote when "SUPERIMPOSE" is
set to "ON" ( pg. 12), you can see the current VCR status on the
TV screen. The indications are not recorded even if the VCR is in
the recording mode.
Channel and
auxiliary input
Day and
CH125
clock time
THU 12:00 AM
STEREO
STEREO
SAP
program
indication
SAP
B
indication
NORM
Audio
HI-FI
monitor
indications
To recall an indication
A
Press OSD (OK).
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, are left displayed on the screen.
B
Press OSD (OK) again to clear the display.
The RECORD/PAUSE indication is left displayed on the
screen.
— 4 —
VCR operation
Timer warning display
mode
RECORD
PAUSE
–WARNING– SP
TIMER RECORDING
TO START SOON
(CANCEL)
+ + + E
INDEX 1
REMAIN 10:00
COUNT – 1:23:45
Time counter
Tape speed
Cassette mark
Tape position
Index number
Tape
remaining time