Installations; Select Television System - JVC HR-J83MS Instructions Manual

Installations

Make sure that the power to the video cassette recorder and TV
is off before making the following connections.
Connection A (basic)
In order to use the video cassette recorder it must be connected
between the antenna and the TV.
Connect your TV antenna cable to the video cassette
1
recorder's antenna input terminal.
Connect one end of the provided RF antenna cable to
2
the video cassette recorder's RF output terminal and
the other end to the TV's antenna terminal.
Connect the power cord to your household AC outlet.
3
Connection B
For connection with a TV that has VIDEO/AUDIO IN/OUT
terminals. Use RCA type pin connection cords (available from
audio/video stores) for connection. This connection is in addition
to connection A.
1 Follow steps 1 and 2 of "Connection A".
2 Connect the TV's VIDEO output and AUDIO output
terminals to the video cassette recorder's VIDEO input
and AUDIO input terminals.
Connect the TV's VIDEO input and AUDIO input
3
terminals to the recorder's VIDEO output and AUDIO
output terminals.
Connect the power cord to your household AC outlet.
4
Note:
Use the conversion plug (provided) depending on the type of
your AC wall outlet.
R
Connection B

Select television system

1
China, Mongolia
Russia
Hong Kong
Kuwait, U.A.E,
Indonesia, Singapore,
Thailand, Malaysia
Iran, Saudi Arabia,
Egypt, Morocco,
Lebanon, Iraq
U.S.A., Japan,
S. Korea, Taiwan
Notes:
If no colours appear on the screen when using a multi-
system television with its system select switch set to AUTO,
change the switch position to correspond to the recorder's
RF system select switch (K, I, G or M).
For more information on multi-system compatibility.
Connection A
Set the SYSTEM switch to the appropriate position
according to your TV system. (Refer to the chart below.)
Colour TV broadcast
Major countries
PAL D/K
SECAM D/K
PAL I
PAL B/G
SECAM B/G
NTSC M
Switch
system
position
K
I
G
M
p.25
7