Information On Multi-System Compatibility; Setting Of The Colour System Select Buttons - JVC HR-J73MS Instructions Manual

Information on Multi-System Compatibility

Setting of the colour system select
buttons
Use the COLOUR SYSTEM button on the recorder's front panel
to select the colour system. Pressing this button changes the
mode as illustrated below. An indicator on the screen will show
which mode is selected.
COLOUR
SP/LP/EP CH SET
SYSTEM
Mode Display
Usually set to this mode. This mode
automatically detects PAL, NTSC,
SECAM or MESECAM and adjusts to
AUTO
the colour system being recorded or
(Colour Signal)
played back. When it does not perform
properly, set the colour system
manually.
For recording, there is a choice of 4
selectable modes; PAL/MESECAM/
NTSC/NTSC4.43.
MANUAL Select the mode that matches the
(Colour Signal) colour signal being received. For
playback, there is an additional mode
which allows NTSC tapes to be played
back and viewed on PAL TVs.
Notes:
In the AUTO mode, NTSC signals will be automatically
recorded as NTSC.
SECAM signals will always be recorded as MESECAM.
Select the AUTO or MANUAL MESECAM mode when
recording SECAM signals.
When playing back a SECAM tape, select the AUTO or the
MANUAL MESECAM mode. The playback picture will always
be mono chrome.
Description
Off-air recording
The built-in multi-system tuner is capable of receiving D/K, I
broadcasts.
TV system
SECAM D/K (OIRT)
HR-J73MS
Multi-system tuner
Recording circuit
Recorded tape
NTSC
Note:
This model does not operate in BRAZIL (PAL-M) or
ARGENTINA (PAL-N).
PAL D/K, I
MESECAM PAL
25