Advertisement
Quick Links
Film-Tech
The information contained in this Adobe Acrobat pdf
file is provided at your own risk and good judgment.
These manuals are designed to facilitate the
exchange of information related to cinema
projection and film handling, with no warranties nor
obligations from the authors, for qualified field
If you are not a qualified technician, please make no
adjuatments to anything you may read about in these
service engineers.
Adobe manual downloads
www.film-tech.com
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Odyssey TM-2
- Page 1 Film-Tech The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. These manuals are designed to facilitate the exchange of information related to cinema projection and film handling, with no warranties nor obligations from the authors, for qualified field service engineers.
- Page 2 Installation & User Manual for the Model TM-2 Sound Monitor Odyssey Products, Inc.
- Page 3 Attention Installer A protective film covers the LCD Screen on the TM-2 Monitor. You will need to peel gently to remove this film before using the sound monitor. O d y s s e y P r o d u c t s I n c .
-
Page 4: Monitor Back View
TM-2 Monitor Back View AMP GAIN PRO GAIN Data Port 1 Processor Inputs Amplifier Inputs Power Data Port 2 DB25 Processor Input Fuse Holder DB37 Amplifier Input Connector (THX pin-out) (1.5 Amp Fuse) connector. Also contains the Hearing Accepts Odyssey Input 25 Impaired output. - Page 5 TM-2 Sound Monitor This product is intended for commercial use and for installation in an equipment cabinet designed for commercial use. This installation manual is for use by qualified personnel only. Do not open the unit or perform any servicing unless you are qualified to do so.
- Page 6 Input DB25 Board Configuration (Compatible with THX and Sony Pin-outs) Channel Terminals On Card DB25 Pin Left Shield Left Plus Left Minus Center Shield Center Plus Center Minus Right Shield Right Plus Right Minus Left Surround Shield Left Surround Plus Left Surround Minus Right Surround Shield Right Surround Plus...
- Page 7 Pin-outs of the TMAMP37 Card When used on the back of the Model TM-2 Monitor Screw Terminals (on card) DB37 Pin Left Low Left Mid Left High Left Minus (-) 21, 3 Center Low Center Mid Center High Center Minus (-)
- Page 8 LE- REH REL RE- Plug the TM1-BI card into the DB25 Processor Input connector on the back of the Odyssey TM- 1/TM-2 Monitor. Connect the bi-amped outputs from the processor to the screw-type connector on the TM1-BI card. Connection is made to the 3.5-mm spacing connector on the TM1-BI board as follows.
- Page 9 Right EX Surround Channels. • LS, RS (Left Surround, Right Surround) NOTE: The TM-2 only monitors the subwoofer signal from the amplifier and displays it only on the signal present LED • The default mode for the TM-2 is L+C+R in processor mode.
- Page 10 • Pressing the channel select button changes the channel to be monitored. After 30 seconds, if no buttons are pressed the TM-2 will revert to L+C+R. Format will remain in the last mode selected (processor or amplifier). • The Processor/Amplifier switch selects between the signals coming from the Analog Processor, and the signals coming from the output of the power amplifiers.
- Page 11 Processor to Amplifier on the front panel. The TM-2 Monitor also provides a Hearing-Impaired output. This output can be used to feed hearing-impaired assisted devices. It is a fixed-level signal formed from summing Left, Center, and Right Channels (internally).
-
Page 12: Warranty Information
Warranty Information Equipment manufactured by Odyssey Products is warranted against defects in materials and workmanship for a one-year period from the date of shipment. There are no other express or implied warranties. Returns During the warranty period, Odyssey will repair or replace, at its option, components which prove defective.
Need help?
Do you have a question about the TM-2 and is the answer not in the manual?
Questions and answers