Download
Share
Print this page
HP ProCurve MSM310 Quick Start Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Wireless Access Point
  5. MSM310
  6. Quick start manual

HP ProCurve MSM310 Quick Start Manual

Hide thumbs Also See for ProCurve MSM310:
1
2
3
4

Advertisement

Quick Links

See also: Reference Manual , Quick Start Manual
The MSM310 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED 802.11a/b/g product. The Wi-
Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The MSM310 is certified
under the SpectraLink Voice Interoperability for Enterprise Wireless (VIEW) Certification
Program when it operates in autonomous mode or in controlled mode in conjunction with
VIEW
an MSM7xx Controller.
Certified
This Quickstart shows you how to get started using the MSM310 Access Point (US J9374A, WW J9379A).
After reading this Quickstart, you can visit www.procurve.com/manuals and download documents of particular interest such as the MSM3xx / MSM4xx Access
Points Management and Configuration Guide and the MSM7xx Controllers Management and Configuration Guide.

Hardware overview

Package contents
MSM310, two 2.4-GHz (2-dBi) / 5-GHz (2-dBi) dual-mode omnidirectional antennas.
The MSM310 ships fully assembled and ready to operate.
Reset button
Press and quickly release the button to reset the MSM310. To reset to factory default
settings, press and hold the reset button until the status lights flash three times, then
release. For details, see Resetting to factory defaults in the MSM3xx / MSM4xx Access
Points Management and Configuration Guide.
To reconnect to the management tool after a factory reset, your computer must be
Note:
connected to Ethernet Port 1.
MSM310 Access Point Quickstart
Radio and antennas
The MSM310 has a single radio with two antennas for diversity.
The antenna connectors are reverse-polarity SMA jacks. Antennas or cable connectors must
use RP-SMA plugs. Antennas can be mounted directly on the MSM310 or an external antenna
can be connected to the Main antenna connector.
Ethernet ports
The MSM310 has two 10/100 Mbps Ethernet ports with RJ-45 connectors. Port 1 supports
Power over Ethernet (PoE) 802.3af. In controlled mode, only Port 1 is supported. In
autonomous mode, Port 1 or Port 2 can be used.

Advertisement

loading

Related Manuals for HP ProCurve MSM310

Summary of Contents for HP ProCurve MSM310

  • Page 1: Hardware Overview

    MSM310 Access Point Quickstart This Quickstart shows you how to get started using the MSM310 Access Point (US J9374A, WW J9379A). After reading this Quickstart, you can visit www.procurve.com/manuals and download documents of particular interest such as the MSM3xx / MSM4xx Access Points Management and Configuration Guide and the MSM7xx Controllers Management and Configuration Guide.

  • Page 2: Controlled Mode And Autonomous Mode

    Discovery of the service controller is automatic if default settings are used on the The MSM310 has no power. MSM310 and the controller, and both devices are on the same subnet. See Working with controlled APs in the MSM7xx Controllers Management and Configuration Guide.

  • Page 3: Initial Configuration (Autonomous Mode)

    When mounting the MSM310 on a wall or ceiling, ensure that the surface to which you attach the MSM310 and the fasteners you use can support at least .9 kg (2 pounds). Allow Power on the MSM310 (see Powering the MSM310 on this page). Initially, the Power extra weight for cables.
  • Page 4 Disconnect the MSM310 from your computer and use a standard Ethernet cable to On the License Agreement page, read the agreement and select Accept License connect the Ethernet Port 1 on the MSM310 to the network on which it will be used. For Agreement.