Input Signal Selection; Devices - Samsung UA48H6400 E-Manual

Input Signal Selection

You can select a connected external device using the
For example, to switch to a gaming console connected to the second HDMI connector, press
Source
button. From the
names may vary depending on the model.
The following options are available in the
TOOLS
●
Button
Select a port connected to an external device, and press and hold the Enter button. The following
functions are available:
"
Available options for each connector may vary.
Edit Name: Rename devices connected to the TV for easier identification of external sources.
–
For example, you can designate a computer connected to the TV via an HDMI-DVI cable as
DVI PC. Alternatively, simply designate a computer connected to the TV via an HDMI cable as
PC. You can also designate an AV device connected to the TV via an HDMI-DVI cable as

Devices.

Information: View detailed information about the connected devices.
–
Anynet+ (HDMI-CEC): Displays a list of Anynet+ (HDMI-CEC)-compliant devices that are
–
connected to the TV.
"
This option is only available with
Disconnect USB
–
"
This option is only available when a USB device has been selected.
Universal remote setup
●
Universal remote setup
Select
configuring a universal remote control, you can control cable boxes, Blu-ray players, home
theatres, and other external devices using a single remote control.
"
Availability depends on the specific model.
HDMI2
list, select to change the input signal to HDMI mode. Connector
Source
Anynet+ (HDMI-CEC)
Device: Used to safely remove a USB device connected to the TV.
on the screen to configure the universal remote function. By
SOURCE
button.
screen:
set to On.
SOURCE
DVI