19) Use the SS-93 to release the two clips holding
the UI SHIELDING.
21) Carefully turn over the LCD and place it on the
other side of the engine board.
23) Remove the LCD.
15
20) Remove the UI SHIELDING.
22) Use the SS-93 to open the LCD connector. Be
careful not to damage the connector or the
components nearby!
24) Push down the SS-88 camera removal tool to
release the CAMERA retaining clips. Lift up the SS-88
and remove the CAMERA.
Confidential Copyright © 2010 NOKIA All rights reserved
Nokia 6303i Classic
RM-638
Service Manual Level 1&2
Version 2.0
ISSUE 1