Taking Photos - Quer KOM0558 Owner's Manual

Owner's manual
Normal Recording (when not connect to AC power)
When the camera is on, press once Power key to start recording
(you will hear beep sound). The working indicator flickers. Every
other three-minute footage saved as one section. Press Power key
again to stop recording, the indicator off.
Loop Recording (when connect to AC power)
When camera connected to AC power, it will turn on automatical-
ly, you will hear lasting beep sound and indicator flicking. When the
orange indicator flickers, the camera starts to record automatical-
ly (default 720P),
it will save the footage of recording every other 3 minutes. When
Micro SD card is FULL, it will overwrite the early videos footage by
time sequence and continue recording.
Press Power key again (you will hear beep sound) to stop recor-
ding, the indicator off, the camera shuts off.

3. Taking photos

Press MODE key to switch to Camera mode(the indicator is blue)
Under camera mode, aim at the object you want to shoot and press
Power key, it will save the photo automatically.
4. Time Stamp Setting
720P video is with time stamp (default), 1080p is without. If you
want to set the time you want, pls follow below steps:
(1) Create one "txt" file, rename to "TIMERSET.TXT".
(2) Open the "txt" file, input the YEAR/MONTH/DATE/TIME, and
save it, like: 20130319084456Y.
EN
22