Summary of Contents for Opticon CRD-19-E4
- Page 1 CRD-19-E4 User Manual Network and Charging Cradle For H-19 PDA phone Opticon, Inc. http://www.opticon.com Page 1...
- Page 2 Document created Copyright Copyright 2008 Opticon, Inc. All rights reserved. Information in this document is subject to change without notice. No part of this publication may be transmitted, transcribed, reproduced, stored in any retrieval system or translated into any language...
-
Page 3: Table Of Contents
...............................10 DAPTER PECIFICATIONS 4.4 S ..............................10 AFETY AND CERTIFICATE FUNCTIONS AND COMPATIBILITY ............................11 5.1 P ....................................11 ROTOCOLS 5.1.1 Communications protocols ..............................11 5.1.2 Network protocols ................................11 5.1.3 Network connection side..............................11 5.2 F ..................................11 IRMWARE VERSION CONTACT....................................12 Opticon, Inc. http://www.opticon.com Page 3... -
Page 4: Product Overview
Base-T Ethernet network. CRD-19-E4 also has dedicated slots to charge battery separately. CRD-19-E4 is equipped with four H-19 device pockets, four battery pockets, and two Ethernet ports, one for uplink to the Ethernet network and one for optional connection of PC or computing devices. - Page 5 Each connected H-19 handheld device can perform server synchronization and Internet browsing. This solution provides a superior and simplified method of connecting your Opticon H-19 devices to your network, while offering higher security and reliability standards. It works perfectly for the mobile users, field application personnel, and any environment that requires a high level of security and reliability.
-
Page 6: Hardware Installation
2 HARDWARE INSTALLATION Please confirm the following items have been included in the shipping box with the main product. 1. CRD-19-E4 main unit with four (4) battery walls. 2. 12VDC/5A power adapter 3. Quick Start Guide. H-19 pocket Battery pocket Reset Button LAN &... -
Page 7: Hardware Installation
1. Connect the Ethernet cable to the CRD-19-E4 Ethernet Uplink and the other end to Ethernet switch/hub*. 2. Connect the power adapter to DC Jack of the CRD-19-E4, then into the wall outlet. If power is present, the CRD-19-E4 will proceed with normal power on sequence. -
Page 8: Configuration
Download CRD-19-E4 Device Locator from and launch the Opticon Device Locator application to locate the CRD-19-E4 device and find its IP address. Select Broadcast, which is suitable for small to medium networks. If the network is large, choosing Range Search to define and limit the search range is preferable 3.2 Administration Tool (CRD-19-E4 AdminTool) -
Page 9: Restore Factory Default
URL area and then press enter. If the network contains a WINS server, you may use the serial number of the CRD-19-E4 in place of the IP address. http://192.168.101.100:9876 URL: http://<IP-Address>:9876 http://C19E4000194:9876 User Name: admin Password: password You will be presented with a login screen as shown on the right. -
Page 10: Specifications And Provisions
Input: 100 ~ 240 VAC, 1.6 A ~ 0.7 A • Plug: 2.5x5.5mm, center positive polarity • Output: 12 VDC, 5A 4.4 Safety and EMI certificate http://www.opticon.com Note: Please check the Data Sheet on for updated product information. Opticon, Inc. http://www.opticon.com Page 10... -
Page 11: Functions And Compatibility
5.1.3 Network connection side • IP Address: Acquired from DHCP server or manually set • Applicable Standards： IEEE802.3 (10BASE-T), IEEE802.3u (100BASE-TX), 10/100Mbps (auto negotiation) 5.2 Firmware version • http://www.opticon.com For the current Firmware Version, please check Opticon, Inc. http://www.opticon.com Page 11... -
Page 12: Contact
6 CONTACT Please contact OPTICON or your local dealer. Opticon Sensors Europe B.V. The Netherlans tel: +31 (0)23-5692700 / email:sales@opticon.com Opticon Inc. U.S.A tel:800-636-0090 / email:opticon@opticonUSA.com Opticon S.A.S France tel: +33 (0)1-41461260 / email:sales@opticon.com.fr Opticon Sensoren GmbH Germany tel: +49 (0)6074-91890-0 / mail:sales.de@opticon.com Opticon s.r.l.
Need help?
Do you have a question about the CRD-19-E4 and is the answer not in the manual?
Questions and answers