efore you begin Verify that the following items came with your DSL kit: 1. ADSL modem 2. User guide 3. Power adapter 4. RJ45 Straight-through Ethernet cable 5. RJ11 DSL cable (phone cord) Your service provider may include an Ethernet adapter, a line filter or a wall-mount filter in your DSL kit.
Page 3
Install Line Filters Stand-alone Line Filter For each device that shares the DSL phone line: 1. Unplug the device's cord from the phone jack. 2. Plug the filter into the phone jack. 3. Plug the phone cord (or other device cord) into the filter.
Ethernet Installation Make sure that your computer has an Ethernet port. If your computer doesn't have an Ethernet adapter, you need to install an Ethernet adapter with the help of the Ethernet adapter manufacturer's installation instructions. Connect the ADSL modem Internet Connection RJ11 DSL cable Power adapter...
Page 5
PC Configuration Procedures Windows Configuration In order to set up ADSL modem, your PC must first be configured to obtain an IP address from a DHCP server. Follow the procedure below: 1. Click Start > Control Panel. 2. Double-click the Network Connections icon. 3.
Internet Access Router Configuration for your modem comes with PPPoE firmware: 1. Start your Web browser. In the Address box, enter the following: 192.168.254.254 3. When prompted for a user name and password, type admin for the user name and admin for the password.
Page 7
Option 2 - Select Advanced > Internet > Edit then choose Bridging > Next and click Apply /Save Bridge Configuration for your modem comes with bridge firmware. If the modem was configured as bridge, make sure your PC is using the ADSL modem (and not Dial-Up Networking) when connecting to the Internet.
6. Click Connect to the Internet. 7. Click Next. 8. Click Next. 8. Click Setup my connection manually. 9. Click Next. 10. Select Connect using a broadband connection that requires a user name and password. 11. Click Next to type in login information from the service provider.
Page 9
Folllow the procedure below for OS9: 1. Click Apple > Control Panels > TCP/IP. 2. Select Ethernet from Connect via drop-down menu. 3. Select Using DHCP server from the Configure drop-down menu. 4. Close window and save changes. 5. If you have a router, configure the router using the Router Configuration procedure that follows.
Advanced Configuration In order to use advanced features of modem with router firmware, enter the web interface and select Advanced. Select following features to configure: - Local Network IP address / DHCP Server / UPnP - IPv6 LAN Config - Layer2 Interface ATM Interface - Internet Connections / DNS Server / DSL...
Page 11
Management for modem In order to set up modem features, select Management and use following features: - Diagnostics - Access control - Management Control From Remote / From local - TR-069 Client - Internet Time - System Log - Backup Config - Update Firmware - Reset Router Reset to factory default settings / Reboot only...
Troubleshooting LED lights can help to find the working status of modem. Function Color Definition Power not applied Green Normal system operation Self-test in progress Power System is booting Self-test failure if red keeps on Blinking Red Firmware upgrade in process No DSL signal is detected Slow Blinking DSL line handshaking in progress...