Advertisement
USInG YoUr TUrBo HUB
Connecting your computer through an Ethernet cable
• Attach the enclosed Ethernet cable to one of the Ethernet connectors
(1 – 4) on the back of the Turbo Hub.
• Connect the other end of the Ethernet connector to a PC/laptop.
• Launch your Internet browser and you're online!
You can connect up to four (4) computers using the Ethernet ports. one shielded
Ethernet cable is included.
note: If connecting additional PCs, use only shielded Ethernet cables in order to
fulfill electrical emissions requirements (CE, FCC).
Connecting your device through Wi-Fi
Wi-Fi security has been enabled on your Turbo Hub. To connect through Wi-Fi,
enter the following into your Wi-Fi network Connection Manager on your Wi-Fi
enabled PC/laptop or device:
• The Wi-Fi network name or network SSID. You can find your Wi-Fi network
SSID name printed on the back of your Turbo Hub. The Wi-Fi network
name will be BellXXXX, where XXXX is random numbers or letters.
• The WPA passphrase or access code. You can find your WPA passphrase
printed on the back of the Turbo Hub, under the title "WPA Passphrase."
• Launch your Internet browser and you're online!
You can connect up to 11 devices using Wi-Fi.
4
Advertisement
