iRex iLiad User Manual page 65

If you wish to enable PIN code protection select 'On', to disable
PIN code protection select 'Off'
Note: Factory Default PIN Code is 0000.
Note: In case you forget or loose your PIN Code you can reset
your PIN Code via MyIrex (see Chapter 14 for more info).
Warning: Before you enable PIN Code protection make sure you
have successfully configured an iLiad network profile or you will
not be able to reset your PIN Code when needed.
10.15 Select PIN Code
If you have enabled PIN code protection you will need to enter a
4 digit PIN code in both fields and Click on 'Confirm' to confirm
your new PIN code.
If you set a PIN code for the first time, the current PIN code will
be the factory default PIN code which is 0000.
W arning: You can only enter the PIN code with the stylus. Make
s ure you always have the stylus available after enabling the PIN
code protection.
Copyright © 2007 iRex Technologies. All rights reserved.
65