Advertisement
BS PLUG WIRING
Wiring Instructions: Should it be necessary to change the plug please
note the wires in the mains lead are coloured in accordance with the
following code :
BLUE - NEUTRAL
BROWN - LIVE
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:
1. The BLUE wire is the NEUTRAL and must be connected to the terminal
which is marked with the letter N or coloured BLACK.
2. The BROWN wire is the LIVE and must be connected to the terminal
which is marked with the letter L or coloured RED.
3. NEITHER WIRE must be connected to the terminal which is marked with
the letter E, the earth symbol
GREEN/YELLOW.
4. Always ensure that the cord grip is positioned and fastened correctly.
If a 13A (BS 1363) fused plug is used it must be fitted with a 3A (BS 1362)
fuse. If in doubt consult a qualified electrician.
Wiring for a 13 Amp Plug (BS1362)
.
, coloured GREEN OR
ASSEMBLY INSTRUCTIONS
1.
Front grille
2.
Fan blade nut
3.
Fan blade
4.
Securing nut
5.
Rear grille
6.
Motor shaft
7.
Motor housing
The grilles, fan blades and the main body of the fan are packed separately to
protect your fan from damages during transportation.
Be sure your fan is unplugged from the mains supply before proceeding.
•
Insert the main pillar (11) into the hole of the fan base (12), tighten with
the base and pillar nut (13).
•
Remove the rear grille securing nut (4) from the motor cover and secure
the rear grille (5) to the motor cover using the three pins and fasten with
rear grille securing nut (4).
8.
Oscillation knob
9.
Rotary speed control switch
10.
Power cord
11.
Main pillar
12.
Base
13.
Pillar nut
14.
Grille screw
Advertisement
