Antec DataChute PCI User Manual

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DataChute PCI and is the answer not in the manual?

Questions and answers

Summary of Contents for Antec DataChute PCI

  • Page 1 DataChute PCI Table of Contents Introduction Package Contents System Requirements Software Setup Hardware Setup Specifications Release Note...
  • Page 2 16-bit PC Card standard defined in 1997 PC Card Standard. DataChute PCI provides a rich feature set that makes it the best choice for bridging between PCI and PC Card in desktop computers.
  • Page 3 PCMCIA Socket I Supports IRQ steering, software driver provided. Power Switch DataChute PCI provides easy access to use PC Cards on a desktop PC. The 3.5" front Drive Unit with built-in two sockets is connected to Fig. 2 the PCI Interface Board by using the flat ribbon cable. DataChute PCI provides a two front-access PCMCIA socket solution for the desktop PC.
  • Page 4: System Requirements

    System Requirements Package Contents To install and use the DataChute PCI, your system In the package of the DataChute PCI, you will find the following: must have: 2 Slot PC Card Drive Unit Flat Ribbon Cable Assembly Hardware Requirements PCI Interface Board...
  • Page 5: Software Setup

    The device driver software contained in the Setup Diskette is necessary Software Setup Procedure for appropriate operation of the DataChute PCI. Together with the spe- cial IRQ steering circuit embedded in the Cirrus CL-PD6729 chip set, 1. Power ON your computer with Windows 95 OSR 2/Windows the driver software accomplishes the necessary hardware configuration 98/Windows 98 Second Edition/Windows NT 4.0.
  • Page 6: Hardware Setup

    Power OFF your computer before installing the DataChute PCI hardware. Please follow the instructions to install your DataChute PCI: D Type 1. Before trying to install your DataChute PCI, please POWER OFF your Drive Unit PCI Interface Board computer and remove the power plug from the wall outlet.
  • Page 7: Specifications

    5. Install the 2-Slot PC Card Drive Unit into the 3.5" drive bay. Use the for each R2 socket. mounting screws included in the package of the DataChute PCI to secure the PC Card Drive in place. Intel 82365SL registered compatible, ExCA compatible.
  • Page 8 2000, hardware must be installed first, then the software. Please be aware and follow the instructions above accordingly to keep DataChute PCI work properly with your computer. Thank you for choosing DataChute PCI, and we wish you enjoy the convenience and fun of using it.

Table of Contents