Main Menu
Main Menu
Main Menu
Replacing Rear Turn Signal Light
Bulbs
HOLDING CLIPS
1.
Open the trunk.
2.
Remove the holding clips from the
lining by using a flat-tipped
screwdriver.
Table of Contents
Table of Contents
3.
Remove the socket by turning it
one-quarter turn counterclockwise,
and pull the bulb straight out of its
socket.
4.
BULB
5.
6.
SOCKET
Push a new bulb straight into the
socket until it bottoms, and
reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Test the new bulb to make sure it
works.
Set the lining back.
Lights
217