Remote Control Preparation - Jay Tech Cameras JTC 19C User Manual

REMOTE CONTROL PREPARATION

BATTERY INSTALLATION
Install the batteries as the following pictures. Be sure + and – terminals are positioned as
indicated in the battery compartment (Fig1).
SERVICE LIFE OF BATTERIES
 The batteries normally last for one year although this depends on how often the remote
control is used.
 If the remote control fails to work even when it is operated near the player, replace the
batteries.
 Use two size AAA dry batteries.
NOTE:

Do not drop, step on or otherwise impact the remote control. This may damage the
parts or lead to malfunction.

If the remote control is not going to be used for a long time, remove the batteries.
REMOTE CONTROL OPERATION
Point the remote control from no more
than about 6 m from the remote control
sensor and within about 60° of the front
of the player (Fig2).
NOTES:
 The operating distance may vary
according to the brightness of the
room.
 Do not point bright light at remote
control sensor.
 Do not place objects between the
Remote control and the remote
control Sensor.
 Do not use this remote control while
simultaneously operating the remote
control of any other equipment.
Fig1
Push
Open
Press
Fig2
Remote Control
Sensor
9