Page 1
DELV-MLCD25 DELV-MLCD25 DELVCAM HIGH PERFORMANCE MICRO 2.5” LCD with rechargeable Battery...
Page 2
LCD will operate for 1 hour on battery. The DELV-MLCD25 is very useful for those environments where a small LCD is the answer. It is provided with a smart wrist mount strap for easy viewing. A real asset for video service techs, the MLCD25 can be used for signal confirmation in CCTV and security jobs.
LOOPING VIDEO FEATURE: The DELV-MLCD25 is provided with a LOOPING video input. If the monitor is the only device in the line then the switch at the top of the monitor must be in the 75 position. If you plan to loop the video in and out of the monitor then you must use the VIDEO-T connector provided.
Page 5
TYPICAL VIDEO LOOPING CONFIGURATIONS The DELV-MLCD25 works in either PAL or NTSC video standards system. It is reliable and rugged and will provide hours of good performance. They are a few rules to help keep the product working: DO NOT STORE IN DIRECT SUN OR EXTREME HEAT...
General Trouble Shooting 1. Only display black and white image: Please make sure that the color level settings of saturation brightness and contrast is proper if the monitor has these adjustments. 2. No image after connected to power: Please check whether the cables are tightly connected at both ends. 3.
SAFETY PRECAUTIONS 1. To prevent fire or shock hazard, do not expose this equipment to an environment of high humidity and/or dust. Do not use in an unprotected outdoor installation or any area classified as overly damp or wet. 2. The temperature for installation should be kept between 0°C ~ 60°C. Avoid direct sunlight exposure or extreme changes of temperature over a short period of time.