Playback; Basic Playback - JVC TH-C40 Instructions Manual

Dvd digital theater system
Hide thumbs Also See for TH-C40:
Table of Contents

Advertisement

Playback

• The icon such as
shows the disc formats or file types the
operation is available for.
IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector
to AUDIO.
2 Press DVD or USB MEMORY.
The buttons described below are used on pages 19 to 22.
Number
buttons
Cursor
(3/2)/
ENTER

Basic playback

7 To play a disc
Press the desired DISC (1-5)
0 on the center unit.
• The system turns on and the disc tray comes
out.
Place a disc.
Label side up
Press DISC (1-5), with SHIFT pressed.
NOTE
• Up to 5 discs can be loaded.
• You can also start playback by pressing the following buttons;
– DVD or 3 (play button) on the remote control
Remote
– DISC(1-5) 3 or 3 on the center unit.
control mode
selector
• The system plays back available discs sequentially until you stop
playback or until the disc loaded on the DISC 5 tray reaches to the
end. However, when DVD VIDEO is loaded in the system, playback
of the disc next to the DVD VIDEO will not start.
7 To play a file in a USB mass storage class device
Press USB MEMORY.
The operations of the files in a USB mass storage class device
depend on the file types stored in the device.
• For details on connecting a USB mass storage class device, see
"Connecting a USB mass storage class device". (See page 13.)
7 When playing the following files...
(play button)
• For MP3/WMA files
The file control display (see page 27) appears on the TV screen.
• For JPEG files
Each file (still pictures) is shown on the TV screen for about 3
seconds (slide-show). When stopping playback, the file control
display (see page 27) appears on the TV screen.
• For ASF/MPEG-2/MPEG-1 files
When stopping playback, the file control display (see page 27)
appears on the TV screen.
• For DivX files
During the readout time, "Reading Index... " may appear on the
TV screen. When stopping playback, the file control display (see
page 27) appears on the TV screen.
NOTE
• When several types of files are recorded on a disc/device, select
appropriate file type on the setup menu. (See page 34.)
• (For JPEG) The system cannot accept operations even though you
press any buttons before the entire picture appears on the TV screen.
7 To pause playback
Press 8.
To continue playback, press 3 (play button).
7 To stop
Press 7.
When placing an 8 cm disc

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents