Table of Contents
Advertisement
Sprayer Capacity
Construction
Brass Wand Length
Pressurization
Handle
Spray Control
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
read the entire imPortant SaFety inStructionS section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
1.
To attach the Spray Wand (6) to the Spray Control Body (7), loosen the Spray
Wand Nut (5).
2.
Push the Spray Wand through the Wand Nut into the Spray Control Body until it
stops.
3.
Slide the Spray Wand Nut down over the Spray Control Body and screw on firmly
by turning the Nut clockwise. Do not overtighten.
4.
Lubricate the piston o-rings (at the end of the Plunger) by applying petroleum
jelly or white grease.
1.
This hand pumped sprayer is intended for spraying common household
chemicals in home, lawn or garden. Its Plastic, Rubber and Brass construction is
impervious to most commonly available household chemicals. It is portable and
easy to use and keep clean.
SKU 97411
For technical questions, please call 1-800-444-3353.
SPeciFicationS
1-½ Gallons
Polyethylene Handle, Polypropylene Body, Brass
Wand, Rubber Hose and Nylon Strap
12-½" Long
Hand pump requires 20 - 30 pumps to pressurize
Lockable
2-¼ L x ¾" W squeeze operated
unPackinG
Set uP inStructionS
assembly
Functions
Page 5
Advertisement
Table of Contents
