Entering E-Mail Addresses; Deleting Characters; Starting A New Line - Sharp SH002 Manual Manual

■
Entering Two or More Characters
Assigned to the Same Key
After you enter the first character, press C and then enter
the next character.
■

Deleting Characters

To delete one character at a time, move the cursor to the
character you want to delete and then press R. To
delete all characters to the right of the cursor, hold down
R for at least one second. If there are no characters to
the right of the cursor, holding down R will delete all the
characters.
■

Starting a New Line

Press ;.
• Certain functions such as C-mail do not support
entering new lines.
8

Entering E-mail Addresses

■
E-mail Address Compatible Characters
• Before you enter an e-mail address, switch to the
lowercase alphanumeric (single-byte) mode.
• When changing your e-mail address, you can enter up
to 30 single-byte alphanumeric and symbol characters
for the account name (part to the left of @). Note the
following:
- Uppercase characters cannot be used.
- Period (.) or zero (0) cannot be used as the first character.
■
How to Enter E-mail Addresses
Example: Entering "taro.23@ezweb.ne.jp"
Enter "taro.23".
t : Press 8 once.
a : Press 2 once.
r : Press 7 three times.
o : Press 6 three times.
. : Press 1 once.
2 : Press 2 once and then ;.
3 : Press 3 once and then ;.
➡
Press [ (OK).
➡
Enter "@".
@: Press 1 twice.
➡
Press B.
The cursor moves to the conversion candidate list.
➡
Use E to select @ezweb.ne.jp and then press
[ (OK).