Using The Tuner; Tuning In A Station - JVC MX-KC4 Instructions Manual

Using the Tuner

Numeric
keys
FM MODE
1
1 2 3
CD CD CD
REPEAT PROGRAM /RANDOM
TAPE A
SOUND
MODE
FADE
RHYTHM AX MUTING
REMOTE CONTROL
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
❏ Before listening to the radio:
• Make sure that both the FM and AM antennas are correctly
connected. (See pages 4 and 5.)
Setting the AM Tuner Interval Spacing
When shipped, the AM tuner interval is set to 9 kHz spacing (50
kHz spacing for FM broadcast). You can change it to 10 kHz spac-
ing.
To select 10 kHz intervals, press the 7 button on the Remote
Control for more than 2 seconds in Standby mode, "AM-9" ap-
pears on the display, then press the 10 button on the Remote Con-
trol (at the same time, the 100kHz spacing is selected for FM
broadcast).
To select 9 kHz intervals again, press the 7 button on the Re-
mote Control for more than 2 seconds in Standby mode, "AM-10"
appears on the display, then press the 9 button on the Remote Con-
trol.
One Touch Radio
Just press the FM/AM button to turn on the System and start play-
ing the station you were last tuned to.
❏ You can switch from any other sound source to the radio by
pressing the FM/AM button.
9
STANDBY/ON
SLEEP
AUX
FM /AM
FM/AM
SET
FM MODE
FM/AM
Á
CD
1
7
TAPE B Á
VOLUME
Band display, Frequency display, Preset channel
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
FM mode indicators

Tuning In a Station

1
Press the FM/AM button.
The Band and Frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the
preset number appears first.)
Each time you press the button, the band alternates between
FM and AM.
on the Unit
¢
4
FM /AM
or
on the Remote Control