Power Led Blinking Timing Chart; No Power - Panasonic TC-L32C3 Service Manual

TC-L32C3
6.2.

Power LED Blinking timing chart

1. Subject
Information of LED Flashing timing chart.
2. Contents
When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the
identified by the number of blinks of the Power LED on the front panel of the unit.
6.3.

No Power

First check point
There are following 2 states of No Power indication by power LED.
1. No lit
2. Red is lit then turns red blinking a few seconds later. (See 6.2.)
BlinkingTimes Contents
1 BACK LIGHT SOS
2 SUB 1.8V SOS
3 SUB 1.2V SOS
4 POWER SOS
10 SUB 3.3V_SENSE
11 TC_DCDC_SOS
12 SOUND_SOS
Check point
LCD Panel
P-Board
A-Board
A-Board
A-Board
P-Board
A-Board
A-Board
A-Board
Speaker
12