Option Menu Options; Aspect Ratio Control; Cinema 3:2 Mode Setup - LG 52SX4D-UB Owner's Manual

Option Menu Options

Option Menu Options

Aspect Ratio Control

Aspect Ratio Control
- Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format.
When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be dis-
played.
- If you are viewing a picture with a 16:9 aspect ratio, you can't use the Horizon aspect ratio option.
- Horizon aspect ratio is not available for Component 1-2 (720p/1080i)/RGB-DTV (720p/1080i)//HDMI1/DVI-DTV
(720p/1080i)/DTV(720p/1080i), HDMI2-DTV(720p/1080i) input source.
- RGB-PC/DVI-PC input source use 4:3 or 16:9 aspect ratio.
1. Press the RATIO button repeatedly to select the desired picture format.
You can also adjust Aspect Ratio
• Set By Program
Selects the proper picture proportion to match the source's image. (4:3 → 4:3, 16:9 → 16:9)
•
4:3
Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both
the left and right sides.
•
16:9
Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
• Horizon
Choose when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both
Horizon
sides, to create a spectacular view.
• Zoom 1
Choose when you want to view the picture without any alteration. However, the top and bottom portions
Zoom 1
of the picture will be cropped.
• Zoom 2
Choose when you want the picture to be altered, both horizontally extended and vertically cropped. The
Zoom 2
picture taking a halfway trade off between alteration and screen coverage.
• Cinema Zoom
Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or
reducing the picture, the image may become distorted.
You can adjust the enlarge proportion of Cinema Zoom using

Cinema 3:2 Mode Setup

Cinema 3:2 Mode Setup
Set up the TV for the best picture appearance for viewing movies.
1. Press the MENU button and then use
G
2. Press the button and then use
G
3. Press the button and then use
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
in the OPTION menu.
D / E
D / E button to select the
D / E button to select Cinema 3:2 Mode
D / E button to select On or Off .
http://www.pureglare.com.au
button. The adjustment range is 1~16.
OPTION menu.
.
Operation
Owner's Manual 67