INSTALLATION AND OPERATING INSTRUCTIONS INSTALLATION AND OPERATING INSTRUCTIONS Viron P320 eVo Viron Cartridge Filter Viron P600 eVo Pool and Spa Pumps Bolero ND Cleaner INSTALLATION AND OPERATING INSTRUCTIONS Viron P320 eVo Viron P600 eVo Rainbow Pool Products PO Box 2388, Mansfield Qld 4122...
Page 2
SERIOUS INJURY OR DEATH MAY OCCUR IF THIS PRODUCT IS NOT USED, OPERATED OR INSTALLED ACCORDING TO THESE INSTRUCTIONS AND RELEVANT AUSTRALIAN STANDARDS. THIS APPLIANCE IS NOT INTENDED FOR USE BY YOUNG CHILDREN OR INFIRM PERSONS. PLEASE ENSURE YOUNG CHILDREN ARE SUPERVISED SO THAT THEY DO NOT PLAY WITH THE APPLIANCE. PUMP PRODUCES HIGH PRESSURES –...
Page 3
The Viron EVO Pool Pump range is available in a variety of models, with the following factory set speeds which offer approximate flow rates: Model High Medium Viron P320 EVO 320 lpm 206 lpm 128 lpm Viron P600 EVO 600 lpm...
INSTALLATION This appliance must be installed by a trained pool professional service technician. When installing the appliance, ensure all parts are installed in the correct zone in accordance with the wiring rules. In particular refer to AS/NZS 3000 (Australia) and EN 60364 (EU). Plan position of pump so that it will be: Free of water flooding, such as in a sump, garden hollow, ditch or at bottom of bank with run off.
OPERATION 1. Prime pump if hair and lint pot is dry as follows – Close off valve on suction line if present. Remove lint pot lid. Fill lint pot and chamber with water. Replace and secure lint pot lid and seal. 2.
Page 6
SELECTION OF APPROPRIATE SPEEDS General Rules: The total volume of water in your pool should be turned over at least once a day. If operating for longer periods of time, you may be able to turn the output of your salt chlorinator to a lower level.
Page 7
OPERATION OF CONTROL PANEL – VIRON P320 EVO & P600 EVO The Viron P320 and P600 eVo pumps incorporate an LCD backlit screen with the following features: In built time clock: Programmable for up to four timer periods each day ...
Page 8
OPERATION OF CONTROL PANEL – VIRON P320 & P600 EVO (CONT…) Using the in built timer to operate pump with an AstralPool Chlorinator or RolaChem dosing unit Factory Default Setting 1. The inbuilt timers are activated and will control the time the pump operates 2.
Page 9
6. Toggle Menu until “TMR” appears. 7. Press UP or Down buttons to turn “TMR OFF” 8. Press “enter” to accept 9. Press “auto” to return to main menu. 10. When cycling through the Menu button TMR will no longer appear 11.
Page 10
Data cable connector: If a compatible AstralPool VX Salt Chlorinator, Viron Salt Chlorinator or Viron Connect Touch Screen, is connected with the AstralPool communication cable, the speed of the pump and operating hours can be controlled by these devices. The Viron P320 & P600 eVo must have its inbuilt timer deactivated if the pump operating times and speeds are to be operated by the compatible AstralPool Salt Chlorinator, RolaChem Dosing Controller or Viron Connect remote touch screen.
Page 11
• All model Viron eVo pumps and compatible VX Timer model chlorinator or Viron Salt Chlorinator • Timer periods set up in chlorinator • Low, medium or high speed can be selected for each timer period • Data cable connecting pump to chlorinator via comms interface module •...
Page 12
SPEED SELECTION EXAMPLES FOR VIRON P600 EVO Function Speed Vacuuming Pool or Spa Medium Speed (high speed may collapse vacuum hose) Operating Spa Jets Medium or High Speed Operating Waterfall or Water Feature Medium Speed or High Speed, depending on effect required Cleaning up pool with Cloudy Water Up to 24 hours on High Speed...
MAINTENANCE Maintenance Schedule: You new product incorporates moving parts and withstands high velocity water with chemicals in it. Some of these parts will wear in the normal course of use and require regular checks and maintenance. Performing these checks and maintenance will identify parts that have worn and require repair/replacement before further serious damage is sustained.
Page 14
VIRON EVO CONTROL FLOW DIAGRAM Inst.300 Viron EVO Pool & Spa Pump V01_12...
WARRANTY AstralPool Australia Pty Ltd (ABN 97 007 284 504) ("AstralPool") provides the following warranty in relation to its Viron eVo series Pool and Spa pumps ("Product"). Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
Page 16
Exclusions The warranty will not apply where: the customer is in breach of the Terms and Conditions of Sale; the Product was used for a purpose other than one it was intended for; the Product was repaired, modified or altered by any person other than AstralPool; the Product has not been installed, maintained and/or operated in complete compliance with the installation and operating instructions and any instructions by AstralPool;...
Page 17
Model No.: ____________________________ Serial No.: ____________________________ Inst date.: ____________________________ Installer.: ____________________________ Rainbow Pool Products PO Box 2388, Mansfield Qld 4122 Telephone STD 61-7-3849 5385 Facsimile STD 61-7-3849 5384 Email: info@rainbowpoolproducts.com.au Web: www.rainbowpoolproducts.com.au Inst.300 Viron EVO Pool & Spa Pump V01_12...
Need help?
Do you have a question about the Viron P320 eVo and is the answer not in the manual?
Questions and answers