Removing The Windows-Button Board; Prerequisites; Procedure - Dell Inspiron 11-3147 2-in-1 Owner's Manual

Removing the Windows-
Button Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the battery.
3 Remove the
4 Remove the

Procedure

CAUTION: Place the display-panel assembly on a soft and clean
surface to avoid scratching the display.
1 Place the display-panel assembly face down on a flat surface.
2 Peel off the adhesive tape to access the Windows-button board cable.
3 Lift the connector latches and disconnect the Windows-button board
cable and the touch-board cable from the Windows-button board.
4 Remove the screw that secures the Windows-button board to the display
bezel.
70
base cover.
display assembly.
display back-cover and antenna
Computer. After working inside your
After Working Inside Your
assembly.