JVC LT-Z32FX6 Service Manual page 11

3.1.8 REMOVING THE SW PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 2 screws [A].
(2) Remove the CONTROL ASS'Y with SW PWB.
(3) Remove the 2 screws [B].
(4) Remove the SW PWB from the CONTROL ASS'Y.
3.1.9 REMOVING THE SPEAKER (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 6 screws [C].
(2) Remove the SPEAKER (L /R).
NOTE:
• Since the speaker is attached in a certain direction, attach
the speaker in the same correct direction as it has been
attached.
• When the speaker is decomposed, the performance cannot
be kept.
3.1.10 REMOVING THE LED PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 2 screws [D].
(2) Remove the STAND BRACKET.
(3) Remove the 2 hooks [E].
(4) Remove the LED PWB.
C
SPEAKER
K
SW PWB
A
CONTROL ASS'Y
G
MAIN BASE
G
K
H
TOP FRAME
H
B
A
FRONT PANEL
3.1.11 REMOVING THE ILLUMINATE LENS (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the LED PWB.
• Remove the STAND BRACKET.
(1) Remove the 2 screws [F].
(2) Remove the ILLUMINATE LENS.
3.1.12 REMOVING THE LCD PANEL UNIT (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the BACK BRACKET.
• Remove the STAND BRACKET.
• Remove the POWER CORD HOLDER.
(1) Remove the 2 screws [G].
(2) Remove the MAIN BASE.
(3) Remove the 2 screws [H] and 2 screw [J].
(4) Remove the LCD PANEL UNIT with TOP/BOTTOM
FRAME.
(5) Remove the 2 screws [K].
(6) Remove the TOP FARAME from the LCD PANEL UNIT.
(7) Remove the 2 screws [L].
(8) Remove the BOTTOM FARAME from the LCD PANEL
UNIT.
D
STAND
BRACKET
ILLUMINATE LENS
G
F
LCD PANEL UNIT
E
FRONT
Fig.2
C
SPEAKER
J
LED PWB
BOTTOM FRAME
L
(No.YA401)1-11
J
L