DGE-530T Gigabit Ethernet Adapter Card
If you experience any problems with the adapter, check to see that:
the appropriate driver is loaded;
•
the proper grade of cable is employed for the network connection;
•
the supporting hub is properly qualified for the application.
•
The DGE-530T Adapter features four LED indicators:
Link/Activity – Steady green indicates good linkage between the DGE-530T and its
•
supporting server or switch. Flashing green indicates activity (transmitting or receiving)
within the adapter.
Full – Steady green indicates the adapter is operating in full-duplex mode.
•
1000M – The LED indicator lights green when a 1000 Mbps device is connected to the
•
adapter.
100M – The LED indicator lights green when a 100 Mbps device is connected to the adapter.
•
Troubleshooting
16
4