Table of Contents
Advertisement
Quick Links
LUNAR
KRYPTON TRIDENT 1500 (150G)
SURPASS-1SD(150G)
UPOZORENJE VEZANO ZA KUĆIŠTE LASERA
KRYPTON TRIDENT 3000 (300G)
SURPASS-1SD(300G)
NEPTUNE TRIDENT (1000B)
Ova jedinica sadrži interno veliku snagu laserskih uređaja. Nemojte otvarati
SURPASS-1SD(1000B)
kućište lasera, zbog potencijalne izloženosti nebezbednih nivoa laserskog
zračenja. Dostupna laserska nivoa snage ukoliko je jedinica otvorena mogu
izazvati slepilo, trenutne
PODACI EMISIJE LASERA
Klasa lasera
Crveni Laser
Zeleni Laser
Prečnik snopa
Podaci pulsa
Divergencija(svaki snop)
Divergencija (puno svetlo)
Snaga lasera
* Mereno prema IEC klasifikaciji merenja.
VERSION:SD 2.0
Ovo uputstvo sadrži važne informacije bezbednosti i rada laserskog sistema.
Pročitajte uputstvo pre upotrebe, da bi izbegli povrede oka od lasera. Držite
This manual contains important laser system safety and operation
Ovo uputstvo sadrži važne informacije bezbednosti i rada laserskog
ovo uputstvo na sigurnom mestu za buduću upotrebu.
information. Read and understand all instructions prior to powering on
sistema. Pročitajte uputstvo pre upotrebe, da bi izbegli povrede oka od
laser unit the first time, to avoid laser eye injury and to avoid breaking
lasera. Držite ovo uputstvo na sigurnom mestu za buduću upotrebu.
the law. Keep this manual in a safe place for future reference.
opekotine i požar.
Klasa 3B
L650nm LD
DPSS Nd:YVO4, 532nm
<5mm u otvoru
Svi pulsevi < 4Hz (>0.25sec)
<2 mrad
<160 stepeni
Crveni>100mW, Zeleni>30mW
ASTEROID
1
Advertisement
Table of Contents
Related Manuals for Invision KRYPTON TRIDENT 1500
Summary of Contents for Invision KRYPTON TRIDENT 1500
- Page 1 LUNAR ASTEROID KRYPTON TRIDENT 1500 (150G) SURPASS-1SD(150G) UPOZORENJE VEZANO ZA KUĆIŠTE LASERA KRYPTON TRIDENT 3000 (300G) SURPASS-1SD(300G) NEPTUNE TRIDENT (1000B) Ova jedinica sadrži interno veliku snagu laserskih uređaja. Nemojte otvarati SURPASS-1SD(1000B) kućište lasera, zbog potencijalne izloženosti nebezbednih nivoa laserskog ...
- Page 2 USER MANUAL WARNING DATA Lasers can be hazardous and have unique safety considerations. Permanent eye injury and blindness is possible if lasers are used incorrectly. Pay close attention to each safety REMARK and WARNING statement in the user manual. Read all instructions carefully BEFORE operating this device.
-
Page 3: Laser Safety Warnings
USER MANUAL LASER SAFETY WARNINGS Potential laser injury hazard exists with this product! Read these Instructions carefully, which include important information about installation, safe use and service! Caution Avoid direct eye contact with laser 了 light. Never intentionally expose your eyes or others to direct laser radiation. -
Page 4: Stop And Read All Laser Safety Data
USER MANUAL LASER SAFETY AND OPERATING INSTRUCTIONS STOP AND READ ALL LASER SAFETY DATA Laser light is different from any other light source witch you may be familiar. The light from this product can potentially cause eyes injury if not set up and used properly. -
Page 5: Laser Exposure Warning
USER MANUAL After set up, and prior to public use test laser to ensure proper function. Do not use if any defect is detected. Do not use if laser emits only one or two laser beams rather than dozens/hundreds, as this could indicate damage to the diffraction grating optic, and could allow emission of higher laser levels. -
Page 6: Laser Safety Label Reproductions
USER MANUAL LASER SAFETY LABEL REPRODUCTIONS The label indicates the laser beam output aperture Caution – Class 3B LASER RADIATION, WHEN OPEN, AVOID EXPOSURE TO BEAM LASER RADIOATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT. LASER EMISSION DATA Laser Classification Class 3B/Class4 Green Laser Medium DPSS Nd:YVO4,532nm... -
Page 7: Laser Compliance Statement
USER MANUAL LASER COMPLIANCE STATEMENT This laser product complies with EN/IEC 60825-1 Ed 2,2007-03. GENERAL SAFETY INSTRUCTIONS Every person involved with installation and maintenance of this device have to Be qualified. Follow the instructions of this manual. CAUTION! Be careful with your operations. With a high voltage you can suffer a dangerous electric shock when touching the wires! This device has left out premises in absolutely perfect condition. - Page 8 USER MANUAL cleaning it. Only handle the power-cord by the plug. Never pull out the plug by tugging the power-cord. It is essential to connect the yellow/green conductor to earth. The electric connection, repairs and servicing must be carried out by a ...
-
Page 9: Before Operation
USER MANUAL BEFORE OPERATION Unpacking Instructions CAUTION! Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. -
Page 10: Dmx-512 Connection Between Fixtures
USER MANUAL The unit is supplied with a power plug appropriate to its voltage and destination. Should any other connections be required they must be carried out with the following configuration. Cable(EU) Cable(US) International Brown Black Live Liht blue White Neutral Yellow/Green Green... - Page 11 USER MANUAL Building a serial DMX-chain If you are using the standard DMX-controllers, you can connect the DMX-output of the controller directly with the DMX-input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other XLR-outputs, you need to use adapter cables.
- Page 12 USER MANUAL Proper Laser Set Up & Usage This fixture has been designed to be hung. It is recommended for safety purposes, your lighting effect are properly mounted using a suitable hanging clamp and safety cable. Items appropriate for safe and effective mounting are easily sourced from your lighting vendor.
-
Page 13: Rigging The Fixture
USER MANUAL Rigging the Fixture CAUTION! Please consider the respective national norms during the installation! The installation must only be carried out by an authorized employee or dealers! The installation of the fixture has to be built and constructed in a way that it ... -
Page 14: Product Overview
USER MANUAL PRODUCT OVERVIEW This device has left out premise in absolutely perfect condition. In order to maintain this condition and to ensure safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual. The manufacturer will not accept liability for any resulting damages caused by ... -
Page 15: Rear Panel
USER MANUAL Rear Panel NAME FUNCTION Mains input With socket and integrated fuse holder Switch on and off the power Switch DMX output 3PIN Female XLR port，using for DMX SD card Storage RAM SD MMC storage RAM (less than 2G) DMX input 3PIN Male XLR port, using for DMX ILDA / Hardware Setting... - Page 16 USER MANUAL ILDA / Hardware Setting Panel NAME FUNCTION Turn the knob to adjust the audio respond MUSIC sensitivity. X SIZE The Size of X axis adjustment The Size of Y axis adjustment Y SIZE ILDA THROUGH Standard ILDA DB25 Output(through) Standard ILDA DB25 Input ILDA INPUT ILDA connection indicator LED.
-
Page 17: Control & Function
USER MANUAL IMPORTANT For your own safely and full laser safety Regulation, we do strongly recommend You to take this optional switch! CONTROL & FUNCTION Regular breaks during operation are essential to maximize the life of this device as it is not designed for continual use. Do not switch the unit on and off in short time intervals ... -
Page 18: Operation
USER MANUAL Confirmation, to confirm the laser to show the present mode at the next operation. UP/DOWN, to change operating mode, parameter or DMX address. OPERATION... - Page 19 USER MANUAL AUTO SHOW 1 Press FUNC to enter MODE OPTION Till to AUTO SHOW 1 shown on LCD monitor. The laser is set at AUTO SHOW 1 standalone mode and it will play the preprogrammed show until next setting is changed. AUTO SHOW 1 is fast and hot show which is better for DISCO.
- Page 20 USER MANUAL MUSIC SHOW 2 Press FUNC to enter MODE OPTION Till to MUSIC SHOW 2 shown on LCD monitor. The laser is set at MUSIC SHOW 2 standalone mode and it will play the preprogrammed show until next setting is changed. MUSIC SHOW 2 is slow and soft show which is better for MUSIC BAR.
- Page 21 USER MANUAL In folder ANIMA folder, there are 3 ild file show. They are ANIMA1.ild, ANIMA2.ild, ANIMA3.ild. If you want to do a preprogram show with them, you should do the TXT files as: ANIMA1.ild,12,3 ANIMA2.ild,20,1 ANIMA3.ild,18,4 Save this TXT file with name ANIMA.TXT, change the file name from ANIMA.TXT to ANIMA.PRG IMPORTANT NOTES: “ANIMA1.ild”...
- Page 22 USER MANUAL SLAVE MODE Press FUNC to enter MODE OPTION Till to SLAVE shown on LCD monitor. Connect MASTER and SLAVE lasers with DMX cable. The SLAVE lasers are in SLAVE MODE. Check XLR Control cable connection section for your reference.
-
Page 23: Dmx Channels Chart
USER MANUAL DMX Channels Chart Several optional operating modes were preprogrammed set into this laser projector at DMX channel 1. Before control other DMX channels, please be sure that the channel 1 was set in proper mode (value). DMX CHANNEL 1 CHART CHANNEL VALUE FUNCTION... - Page 24 USER MANUAL Strobe 011-199 Strobing from slow to fast 200-255 Strobing to Sound 000-125 X position 126-185 Moving from slow to fast 186-225 Moving with random speed X Moving 226-245 Random position 246-255 Sound to random position 000-125 Y position 126-185 Moving from slow to fast 186-225...
- Page 25 USER MANUAL 218-255 Rolling to anticlockwise 000-010 Original pattern 010-074 Fixed cliping 075-104 Clipping out CH 10 105-144 Clipping in CLIPING 145-184 Clipping out and in 185-224 Clipping on 224-255 Clipping off 000-009 Original pattern CH11 010-199 Wave effect in pattern with speed control WAVE 200-255 Wave effect in pattern with amplitude control...
- Page 26 USER MANUAL PATTERN LIST 000-050 051-101 102-152 153-203 204-254...
- Page 27 SPECIFIKACIJA USER MANUAL LASER POWER Snaga lasera SURPASS-1SD(150G): 150mW-G 532nm (150G): 150mW-G 532nm KRYPTON TRIDENT1500 SURPASS-1SD(300G): 300mW-G 532nm (300G): 300mW-G KRYPTON TRIDENT 3000 SURPASS-1SD(1000B): 1000mW-B 450nm (1000B): 1000mW-B 450nm NEPTUNE TRIDENT SPECIFICTAIONS Glavni ulaz: AC100~240V, 50/60Hz Osigurač: 250V /1.6A Slow Blow (20mm Glass) Snaga: Mains Input: AC100~240V, 50/60Hz...
Need help?
Do you have a question about the KRYPTON TRIDENT 1500 and is the answer not in the manual?
Questions and answers