Connecting A Speaker/Amplifi Er - Sharp Aquos LC-32LE700UN Operation Manual

Connecting to External Equipment
HDMI Connection
HDMI OUT
When using HDMI-DVI
conversion cable:
DVI OUT AUDIO
• When using an HDMI-DVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6.
When you input the audio signal via the AUDIO terminal with INPUT 6, set "PC Audio Select" to "Input 6 (HDMI)". (See page 40.)
• To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player or other external equipment using an HDMI-
certifi ed cable and set the equipment to 1080p output.
Connecting a Speaker/Amplifi er
Amplifi er with
analog audio input
ANALOG AUDIO IN
Amplifi er with
digital audio input
OPTICAL
DIGITAL AUDIO INPUT
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 30 for details.) PCM audio
outputs from the terminal.
• Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI
connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.
HDMI-certifi ed cable
HDMI-DVI conversion cable
Ø 3.5 mm stereo minijack cable
Audio cable
AUDIO-R (Red)
AUDIO-L (White)
Optical fi ber cable
INPUT 5, 6, 7 or 8
INPUT 6
OUTPUT
DIGITAL AUDIO OUT PUT
13