Table of Contents
Advertisement
SUPERSEDES: October 22, 2010
Plant ID: 001-3949
LCI2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Applicable Documentation . . . . . . . . . . . . . . . . . . . . 3
Typical Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Representations and Warranties . . . . . . . . . . . . . . . . . 3
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Static Electricity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
FCC Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before Installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About this Document . . . . . . . . . . . . . . . . . . . . . . . . 5
Inspecting the Equipment . . . . . . . . . . . . . . . . . . . . 5
What is Not Included with this Equipment . . . . . . . . 5
Equipment Location . . . . . . . . . . . . . . . . . . . . . . . . . 5
Selecting a Power Source . . . . . . . . . . . . . . . . . . . . 5
© 2010 Taco Electronic Solutions, Inc.
Installation Guide
LCI2 User Interface Module
Table of Contents
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mounting the Device . . . . . . . . . . . . . . . . . . . . . . . . 5
Device Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Ethernet (LAN). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Network (LON). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Grounding the Device . . . . . . . . . . . . . . . . . . . . . . . 8
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Mechanical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . 9
502-002
EFFECTIVE: November 12, 2010
1
Advertisement
Table of Contents
Related Manuals for iWorX LCI2
Summary of Contents for iWorX LCI2
-
Page 1: Table Of Contents
LCI2 ........ -
Page 2: Lci2
LCI2 The LCI2 (LCI2) is the master controller for the iWorX® product series. In one single device, it provides an integrated control center for all the HVAC controls, radiant controls, and metering on a network. It has a touch screen for on site configuration and can be remotely accessed and configured over the Internet as well. -
Page 3: Applicable Documentation
Document is being used. The iWorX® LCI2 shall only be used for the applications identified in the product specifications and for no other pur- poses. For example, the iWorX® LCI2 is not intended for use to support fire suppression systems, life support systems, critical care applications, commercial aviation, nuclear facilities or any other applications where product failure could lead to injury to person, loss of life, or catastrophic property damage and should not be used for such purposes. -
Page 4: Precautions
LCI2 Taco Electronic Solutions, Inc. will not be responsible for any product or part not installed or operated in conformity with the Document and instructions or which has been subject to accident, disaster, neglect, misuse, misapplication, inade- quate operating environment, repair, attempted repair, modification or alteration, or other abuse. For further informa- tion, please refer to the last page of this Document for the company’s Limited Warranty Statement, which is also issued... -
Page 5: Before Installing
The equipment should be installed in a secure area like an office or lockable closet. The LCI2 should be mounted where all operators can easily access it and should not under any circumstances be mounted outside. The LCI2 should not be mounted where it is subjected to excessive heat, moisture, corrosive or haz- ardous materials. -
Page 6: Device Connections
Connections are on the bottom of the LCI2. Power The LCI2 requires class 2 power supply: 24 Vac, 50/60 Hz, or 28 to 36 Vdc. The maximum consumption is 13 VA. Use a separate power source—do not use a controller’s auxiliary supply output. -
Page 7: Ethernet (Lan)
Figure 3: Routing cables Ethernet (LAN) The LCI2 uses a standard RJ-45 jack for connection to 10BaseT or 100Base TX (10/100Mb) Ethernet. Plug the LAN connector into the RJ-45 receptacle on the bottom of the LCI2. 502-002, Effective: November 12, 2010... -
Page 8: Network (Lon)
Network (LON) The LCI2 requires twisted pair network wire. When connecting the FTT-10A network to connector, connect the twisted pair to pins NB and NA. These positions are Network B and Network A respectively. Polarity is not an issue since an FTT-10A network is used for communications. -
Page 9: Mechanical
Solution Nothing appears on the LCI2 screen This is most likely related to the input power for the LCI2, ensure the fol- once it is powered up. lowing. A blue LED should be visible on the front of the unit, indicating that the power is on. -
Page 10: Getting Help
LCI2. Getting Help Components within iWorX® LCI2 controller cannot be field repaired. If there is a problem with a controller, follow the steps below before contacting your local TES representative or TES technical service. - Page 11 LCI2 502-002, Effective: November 12, 2010 © 2010 Taco Electronic Solutions, Inc.
-
Page 12: Limited Warranty Statement
Taco Electronic Solutions, Inc. is a subsidiary of Taco, Inc. Visit our web site at: http://www.taco-hvac.com Printed in the USA iWorX® and iView® are registered trademarks of Taco Electronic Solutions, Inc. © 2010 Taco Electronic Solutions, Inc. LON, LONWORKS, & LONMARK are trademarks of Echelon Corporation...
Need help?
Do you have a question about the LCI2 and is the answer not in the manual?
Questions and answers