Chapter 7: Deck Equipment
184 Canvas Top (If Equipped)
NOTE: YOUR DECK HINGES
MAY BE STAINLESS STEEL
SECURING PIN
DECK HINGE
END EYE
1. Insert the end eyes of the main bow (A) into the forward deck hinges (B) and secure with the pins.
2. Unfold the canvas top (C) and snap the front edge of the top (D) to the top of the windshield frame.
3. Insert the end eyes of the aft braces (E) into the aft deck hinges (F) and secure with the pins.
4. Align the secondary bow (G) with the center seam (H) of the canvas by loosening or tightening the top straps (I).
• Since the jawslides (J) were preset during manufacturing they should not need to be adjusted.
• However, if you think the jawslides need to be adjusted, obtain the correct measurements from your selling dealer.
24
G
E
A
B
J
F
160, 180, 184 • Owner's Manual Supplement
C
D
G
H
I