Charmglow Side island Owner's Manual page 4

Step 3
Attach the base assembly to the
side island base. Insert four
M6 x 12mm bolts halfway into the
base panel. Place base assembly
over bolts and slide backward, then
tighten securely.
Step 4
Attach the top bar support bracket
to the frame using two M6 x 12mm
bolts, then tighten securely.
Step 5
Insert the four full threaded
studs into the bottom of
the granite top.
Step 6
With a help of a friend, place the
granite top onto the side island
base. Insert the threaded studs
through the rubber rings which are
located on the top of the frame and
fasten using four M8 nuts
and washers onto
the threaded studs.
(Hand tighten only)
3 3
Four Bolts
(2) Bolts
Rubber Holes