The electric motor has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 5 GENERAL SAFETY RULES Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Page 6
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 6 GENERAL SAFETY RULES (cont.) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
Page 7
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 7 ADDITIONAL SAFETY INSTRUCTIONS FOR SHREDDERS This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 8 ASSEMBLY 1. Remove the silent shredder and all components from the carton. Warning! You may require assistance lifting the shredder out of the carton. 2. Carefully place the shredder housing (10) upside down on a flat surface (Fig.
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 9 OPERATION Prior to operation The shredder operates by using a rolling cutter head, the cutter head rotates and pulls the material past a metal plate which grinds and cuts the material. Prior to operation the metal plate will need to be adjusted to ensure efficient performance.
Page 10
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 10 OPERATION (cont.) Direction control switch Warning! The direction control switch can only be used when the shredder is turned off. 1. Prior to operation the direction control switch (3) must be set either to the feed or reverse position.
Page 11
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 11 OPERATION (cont.) Overload protection 1. The shredder is equipped with a built-in motor protection system that prevents the motor from being overloaded. The motor will switch off automatically in the event of overloading.
• Store the shredder upright in a dry place. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool.
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 13 MAINTENANCE (cont.) Cleaning Always clean the shredder after each use. Warning! Never use a high-pressure washer or running water when cleaning the shredder! Brush away dirt and plant residue which may be caught in the rolling cutter blade.
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 14 SPARE PARTS Limited spare parts are available subject to availability. Please contact your local Bunnings Special Orders Desk to order the required spare parts. Most common spare parts listed below Spare Part/Accessories Part No.
Page 15
2 x Wheel caps 1 x Collection bag 2 x Wheel locking inserts 1 x Instruction manual OZITO INDUSTRIES PTY LTD AUSTRALIA (Head Office) 1 - 23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 Facsimile: +61 3 9238 5588 Website: www.ozito.com.au...
PURCHASED FROM:__________________________________________________ DATE PURCHASED: __________________________________________________ 2 YEAR REPLACEMENT WARRANTY Your Ozito tool is guaranteed for a period of 24 months from the original date of purchase and is intended for DIY (Do it yourself) use only. WARNING The following actions will result in the warranty being void.
Need help?
Do you have a question about the Power Garden SSH-240 and is the answer not in the manual?
Questions and answers