Samsung GT-i9003 Service Manual page 26

Place the Main PBA
9
Place the main PBA onto the bracket. Make sure to place
the camera module into the socket correctly.
11
Place the rear cover
Make sure all the hooks are placed correctly, and press
the volume keys and the power key for tensions.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Connect LCD, Sub-touch key, Antenna and
10
Receiver connectors and place the Power
key
Connect LCD, Sub-touch key, Antenna and Receiver
connectors, and place the Power key to the side of the
bracket
Screw the rear cover
12
Screw 7 points on the rear cover
screw torque : 1.2 ~ 1.4 kgf.cm
7-3
7. Level 2 Repair