Page 1
Issued: July 2009 Installation and Operating Instructions for the following Woodsman models These instructions should be read in conjunction with the flue installation instructions and drawings supplied with each HHF HeatSaver flue system. Testing and Certification AS/NZS AS/NZ AS/NZS AS/NZS...
Your appliance shall be seismically restrained, including the floor protector, using the • two metal seismic restraint brackets supplied. Minimum Material Specifications For Floor Protectors MODEL SPECIFICATION BLAZE 8mm of ceramic tiles ECR MkII 8mm of ceramic tiles MANHATTEN & BOSTON 8mm of ceramic tiles MILFORD...
Page 5
Flue Installation Detail Your Woodsman appliance should be installed with a HeatSaver Flue System. A HeatSaver Flue System is available from all authorised Woodsman dealers throughout New Zealand. The HeatSaver Flue System contains a complete installation drawing and correct clearances from the ceiling level up.
Operating Instructions (Multi-fuels) Your Woodsman Multi-fuel will operate perfectly well burning coal, wood, briquettes or a mixture of any of these. Often the hottest temperatures are achieved by burning a mixture of wood with coal laid over the top.
Set the fire using kindling wood and paper (or a solid fuel lighter), light and close the door; set the lower High - Low control on High and the upper High - Low control on Low. Once the fire is burning brightly, decide if wood or coal is to be used.
Page 8
May 2009 10 YEAR WARRANTY This WOODSMAN fire is warranted for a period if 12 months to the original purchaser, from the date of purchase, against defects of manufacture. If a defect occurs, inform your dealer and the part will be repaired or replaced at our option.
This manual is also suitable for:
BostonMatai dvi-165Matai ecr mkiiImfManhattanMilford...
Show all
Need help?
Do you have a question about the Blaze and is the answer not in the manual?
Questions and answers