Tenda W311M User Manual page 40

Wireless Network Adapter Users' Guide
3. On the right of the interface displays the currently
scanned wireless networks. If the one you want to
connect has not been scanned, click "Refresh Network
List" to update the network list.
Select the wireless network you want to connect, and
click "Connect" or double click this wireless network.
Input a key in the key dialogue box (the key input is
case-sensitive) then click "Connect".
Note: If the wireless device to connect is not encrypted,
the key dialogue box will not pop up.
4. When it shows "Connected" as the picture below, you
can enjoy wireless access to Internet.
-36-