Installation Instructions - NorthStar MSTOVEF CS550 User Manual

Installation Instructions:

When this corn stove is not properly installed, a house fire may result. To reduce the risk of fire, follow the installation instructions.
Contact local building or fire officials about restrictions and installation inspection requirements in your area.
This corn stove must be connected to an exhaust system (chimney) that vents outdoors. Do not connect this corn stove to a chimney
flue serving another appliance.
Please read this entire manual before you install and use this new corn stove. Failure to follow instructions may result in property
damage, bodily injury, or even death.
1.) Floor Protection
A.) The floor must be protected directly under the stove
B.) The floor must be protected 6" beyond the viewing and ash door and 6" beyond each side of the stove.
C.) Use non-combustible materials such as ceramic tile or concrete for floor protection.
6"
6"
2.) Minimum Installation Clearances to
Combustible Materials
A.) 1" minimum clearance to back wall from heater
and chimney connector.
B.) 1" minimum clearance to side wall from heater
and chimney connector.
C.) Install vent piping at clearances specified by the
vent manufacturer.
NOTE: These are minimum clearances from
combustible materials such as shelving or furniture
as established by a nationally recognized testing
laboratory. The clearances for the side walls should
be 24" so side panels can be opened for servicing the
stove.
6"
NON-COMBUSTIBLE
FLOOR PROTECTION
1"
TOP VIEW OF STOVE
1"
1"
FIG00981
4