Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for TV One 1T-VS-558
- Page 1 Instruction Manual 1T-VS-558 PC/HD/DVI Scaler...
-
Page 2: Table Of Contents
Table of Contents Introduction Specifications Package Contents Connecting The Hardware Operating The Unit Troubleshooting Limited Warranty Regulatory Compliance Contact Information... -
Page 3: Introduction
All other trademarks are the property of their respective holders. Features The 1T-VS-558 has many features that enable it to perform in a superior manner. Among those features you will find: Cross Conversion ... -
Page 4: Specifications
SPECIFICATIONS Video Inputs DVI-D (HDCP compliant) 1x via DVI-I Connector Analog RGBHV 1x via HD-15 Connector Analog Component (YPbPr/YUV) 1x via 3x RCA Connectors Video Outputs DVI-D (HDCP compliant) 1x via DVI-I Connector Analog (RGBHV) 1x via HD-15 Connector Formats Supported Input RGBHV, YPbPr, YUV Output... - Page 5 Note 1 – Analog YPbPr input is only available via the 3-RCA Connectors. Note 2– Analog 1080i sources are not accepted over the HD-15 input. Supported Output Formats and Resolutions The 1T-VS-558 can provide a large number of output resolutions in the RGBHV format as shown in the following table: Resolution V.
-
Page 6: Package Contents
PACKAGE CONTENTS Before att empting to use this unit, please check the packaging and make certain the following items are contained in the shipping carton: 1x 1T-VS-558 Scaler 1x Power Supply 1x IR Remote Control 1x Operations Manual Note: Please retain the original packing material should the need ever arise to return the unit. - Page 7 90 degrees to the right or left which will lock it in place. Note 2: To realize maximum quality and performance, use only the highest quality cables with the 1T-VS-558. Low quality cables will cause degradation of the signal quality and limit the distance between both the source and destination...
-
Page 8: Operating The Unit
OPERATING THE UNIT The 1T-VS-558 can be operated from either the front panel controls or via the included Infrared Remote Control. Since Infrared is the control method used most often by the majority of users, please take the time to familiarize yourself with the location and function of the various control buttons on the Controller. - Page 9 OSD mode. 5.1.2 Menu Structure The main structure is as follows. The 1T-VS-558 OSD (On Screen Display) Menu structure is a two tier display. You first select the high level portion of the menu (Video, Color, Output, OSD Characteristics, Audio, Information or Exit) and then, with the exception of the Exit function;...
- Page 10 Note 1: The PC sub-menu controls are only visible when you have selected a PC source. Note 2: The Output sub-menu allows you to specify the resolution you want the 1T-VS-558 to produce. Keep in mind that setting the resolution can cause an apparent malfunction if you select a resolution that your display device cannot reproduce.
-
Page 11: Command Code
(A) Set Commands Command Code Response Description S POWER 0 > POWER OFF POWER OFF S POWER 1 > POWER ON POWER ON S SOURCE 0 > SOURCE COMP COMPONENT INPUT S SOURCE 1 > SOURCE PC PC INPUT S SOURCE 2 >... - Page 12 S SATURATION 0-100 > SATURATION [VALUE] SATURATION 0-100 ADJUST [60] S SHARPNESS 0-100 > SHARPNESS [VALUE] SHARPNESS 0-100 ADJUST [32] 0:OFF ; 1:LOW ; 2:MIDDLE ; 3:HIGH, S NR 0-3 > NR OFF/LOW/MIDDLE/HIGH NR CONTROL S PCHPOSITION 0-100 > PCHPOSITION [VALUE] H POSITION 0-100 ADJUST S PCVPOSITION 0-100 >...
-
Page 13: Troubleshooting
If the signal is present under those conditions, make certain that the power is present to the 1T-VS-558. If it is, check all cables for damage. Cables should be undamaged, as short as possible and should be premium quality. -
Page 14: Limited Warranty
LIMITED WARRANTY tvONE warrants the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a fixed term from the date of purchase. The warranty term for specific product lines is defined below. 1. -
Page 15: Regulatory Compliance
REGULATORY COMPLIANCE The 1T-VS-558 Scaler has been tested for compliance with the appropriate FCC and CE rules and regulations. The power adaptor/supply has been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, regulations and/or guidelines. This product is RoHS compliant.
Need help?
Do you have a question about the 1T-VS-558 and is the answer not in the manual?
Questions and answers