Toshiba 26AV52U Owner's Manual page 54

Chapter 8: TroubleshDDtlng
Channel tuning problems
• Make sure the remote control is set to the correct device
mode
(1&
page 21).
• The channel may have been erased from the channel
memory by the
Channel Add/Delete
feature. Add the
channel to the channel memory
(1&
page 30).
• The channel may be blocked by the
Channels Block
feature. Unblock the channel
(1&
page 49).
• If you are unable to tune digital channels, check the
antenna configuration
(1&
page 29). If you are still
unable to tune digital channels, clear all channels from
the channel list
(1&
page 31) and reprogram channels
into the channel memory
(1&
page 30). If you are still
unable to tune digital channels, use the Reset Factory
Defaults procedure
(1&
page 33). Also see "TV stops
responding to controls" and "Other problems"
(1&
page 53).
Closed caption problems
• If the program or video you selected is not c1osed-
captioned, no captions will display
(1&
page 42).
• If text is not available, a black rectangle may appear. If
this happens, tum off the closed caption feature
(1&
page 42).
• A closed-caption signal may not display correctly in
the following situations: a) when a videotape has been
dubbed; b) when the signal reception is weak; or c) when
the signal reception is nonstandard (1& page 42).
Rating blocking (V-Chip) problems
• If you forget your PIN code: While the PIN code
entering screen is displayed, press
RE3LL
four times
within 5 seconds. The PIN code you previously stored
will be cleared
(1&
page 45).
HOMI problems
For HOMI cables
• Make sure to use cables with the HDMI Logo
(HOml)
(1& page 17).
For Legacy HOMI source
Some legacy HDMI sources may not work properly
with the latest HDMI TV products, due to new standard
adoption.
I
54