Honda 1992 Accord Coupe Owner's Manual page 78

Play (PLAY)
Push the PLAY button to resume tape play and stop rewind or fast
forward operation.
(On US: LX/EX, Canada: EX-R, the indicator will light.)
Repeat Button (REPEAT) (US: LX/EX, Canada: EX-R)
Push the REPEAT button (indicator on) to return to the beginning of
a song or section of programming and repeat its play. Push the
button again (indicator off) to cancel the repeat function and resume
normal play.
TMS function (US: EX, Canada: EX-R)
The TMS function lets you skip to the beginning of a song or other
passage. The tape skips forward or backward, depending on which
direction you push the FF/REW/TMS switch.
Activate TMS by pushing the FF/REW/TMS button and holding it
until you hear a beep. If you push the button down, you will see
REW blinking in the display as the tape rewinds. If you push the
button up, you will see FF blinking in the display as the tape fast
forwards. When the system senses a silent period on the tape, it
goes back to PLAY mode.
NOTE:
(US: LX/EX, Canada: EX-R)
The REPEAT and TMS functions use silent periods on the tape to
find the end of a selection. These features may not work
satisfactorily on tapes that have almost no gap between songs, a
high noise level between songs, or silent periods in the middle of
songs.
Dolby® Noise Reduction (
(US:LX)
Push when playing tapes recorded in Dolby NR (the Dolby NR
indicator will light). Push again when playing tapes not recorded in
Dolby NR. Use of the wrong setting will affect high frequency
response.
(US: EX, Canada: EX-R)
Dolby noise reduction turns on when you insert a cassette. If the
tape is not recorded with Dolby " B " noise reduction, turn it off by
pressing the button.
NOTE:
The Dolby NR circuit will not operate during radio reception.
Dolby noise reduction system is manufactured under license from
Dolby Laboratories Licensing Corporation. "Dolby" and the
double-D symbol are trademarks of Dolby Laboratories Licensing
Corporation.
)
(cont'd)