Pioneer AVH-P5200BT Service Manual page 76

1
A
Test Mode In Activate the test mode
Set the source to DVD
(1)
B
To FE
test mode
(1)
Power On
(8) (1)
Focus Close
Power Off
C
Adjustment
included
(8) (1)
T.Bal
Power Off
Other adjustment
included
D
(8) (1)
Tracking Close
Power Off
Adjustment
included
E
(8) (1)
Measure
Power Off
error ratio
Note 3
F
76
1
2
Note 1 A media type is specified here. Settings should be implemented according to this specification.
Note 2 Switching gains should be: normal gain -> OEIC =H -> OEIC =H and FEPx4 amps ON
Note 3 Any other operation is prohibited during measurement
Note 4 Playback speed should be: 1.3 – 1.6CAV for DVDs and x4CLV fixed for CDs
Number of keys required for the product: nine ((1) – (8) plus EJECT)
The test mode commands 1 to 8 + EJECT as well as the NULL command should be used for the
HOST communication.
To specify the number of tracks, select one from the prepared numbers of tracks.
Change to cyclic in (3). Determine in (4).
For CDs: 1, 4, 10, 11 or 32 tracks
For DVDs: 1, 4, 10, 11, 32, 64 or 100 tracks
Change how to specify an ID address
Specify a digit with the commands (1) and (2). Commands (3) and (4) are to increase/decrease
the number. Determine with the command (5).
Taking the Joy-Stick as an example, (1) = right, (2) = left, (3) = up, (4) = down and (5) = determine.
*F close and F search will not be executed unless LD is ON.
(2) (3)
* To 1 * To 2
(2)-(5) EJECT
Disc Type Eject
Note 1
(2) (3)
Focus Search CRG+
(2)
Focus Search
STOP
(2) (3)
Focus Jump CRG+
(3) (4)
CRG+ CRG-
(8)
Power Off
(2) (5)
Switch playback
Focus Jump
speed
Note 4
AVH-P5200BT/XNUC
2
3
(4) (5)
* To simplified FE test mode
* To 3
(2):1 DVD layer
Powered OFF status
(3):2 DVD layers
(4):CD
(5):CD-RW
(4) (5)
CRG- LD_ON
(4)
Focus Close status 1
CRG-
(5) Focus Close status 2
RF level value
(1) (2)
Measure
Start displaying
error ratio
RF level value
Note 3
(1)
End displaying
RF level value
Tracking Close status
(6) (3),(4)
ID Search T.Jump
+/-
(1)-(4) (3)
Specify No.
Specify ID
of tracks
(5) (5)
Start ID search Start jumping
3
4
Powered ON status
(6) (7)
Carriage transferred
CRG_HOME
to the outermost
circumference
RF level display status
(7)
Tracking Open
(7)
Tracking Open
4