Power Connection - Titan TTB426GDO Operating Manual

4). HARNESS
WARNING! The harness helps the operator
carry this pruner. Always attach the harness when
operating the pruner. Do not carry it only with your hands.
a). Remove the nut and screw from the harness attachment
(19a).
b). Push the harness attachment onto the pole, between
handle and grip, with the holes facing upwards.
Secure the harness attachment with screw and nut.
c). Fit and adjust the length of the harness for easy
operation. (See Fig.8a & 8b, 8c)

2. POWER CONNECTION

WARNING! Before operating the pruner, ensure
that the fastening elements are undamaged.
In order to prevent risk, always switch off the motor and pull
out the mains plug before starting this task.
The pole pruner can be connected to any socket (with
230-240V alternating current).
We recommend to always use the appliance via a Residual
Current Device (RCD) with a tripping current of max. 30mA.
1). Use only rubber-insulation-sheath extension cables
suitable for outdoor use. The recommended size of
extension cord is not lighter than 1.5mm
10meters in length.
POLE PRUNER 750W TTB426GDO
2
and a maximum of
Fig. 8a
Fig. 8b
Fig. 8c