Chevrolet Tahoe 2015 Owner's Manual page 235

7-26 Infotainment System
Call Waiting
Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier to work.
Accepting a Call Waiting Call
To accept a call waiting call, do one
of the following:
Press the button just below the
SWITCH screen button.
Press on the steering wheel
controls.
Declining a Call Waiting Call
To decline a call waiting call, do one
of the following:
Press the button just below the
IGNORE screen button.
Press on the steering wheel
controls.
Do nothing.
Ending a Call
To end a call, do one of the
following:
Press the button just below the
END screen button.
Press on the steering wheel
controls.
Dual Tone Multi-Frequency
(DTMF) Tones
The in-vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu-driven
phone system.
1. When a call is active, press the
button just below the KEYPAD
screen button.
2. Turn the MENU knob to highlight
the first digit and press to select.
If not initially in the phone
application, from the Home Page,
turn the MENU knob, then press to
select the PHONE screen button.
From the PHONE main menu, turn
the MENU knob to highlight Active
Call and press to select.
Bluetooth (Voice
Recognition - Base
Radio)
Using Voice Recognition
To use voice recognition, press
on the steering wheel. Use the
commands below for the various
voice features. For additional
information, say Help while you
are in a voice recognition menu.
Pairing
Pairing a Phone
1. Press . The system responds
Ready, followed by a tone.
2. Say Bluetooth.
3. Say Pair. The system responds
with instructions and a four-digit
Personal Identification Number
(PIN). The PIN is used in Step 5.