Lenovo H30 Series User Manual page 51

To replace a memory module:
1. Remove the computer cover. Refer to "Removing the computer cover".
Note: For this procedure, it helps to lay the computer on a flat, stable
surface.
2. Locate the memory module connectors. Refer to "Locating components".
For Lenovo H30-00 refer to the below instructions:
3. Remove the memory module being replaced by opening the retaining clips as
shown.
4. Insert the notched end
memory module firmly and pivot the memory module until it snaps into place.
Make sure that the memory module is secured in the slot and does not move
easily.
5. Refer to "Completing the installation".
46
User Guide
of the new memory module into the slot. Press the