Actuator Gain Adjustment; Before Adjustment; In Case Of Controlling With Cross Pattern - Samsung HLT6187SX Service Manual

Alignment & Adjustment

3-4-3 ACTUATOR GAIN Adjustment

1. Before Adjustment

1) Turn off the power to put the unit into the STAND-BY mode.
2) In order to enter the Service Mode, Press "Mute" → "1" → "8" → "2" → "POWER" button on the Remote Control.
3) Select "Service" on the first display of the Service mode menu.
4) Press the ▲ ▼ (Up or Down) button to move to ACTUATOR GAIN1 then press ENTER to select.
5) The Actuator gain setup screen will be displayed.
6) Press the ◀▶ (Left of Right) button to adjust. check the smooth picture at it's minimum and maximum values of changing
,then adjust to the mean value.
- Actuator Gain1 : In case of controlling with Cross Pattern.
Actuator Gain
2. Making Adjustments
1) As shown in the picture above, change the actuator values to eliminate saw tooth shapes.
- To fine tune, increase the data value ensuring that you get the center between the starting and ending points of the
disappearing saw tooth shape.
3-20
40
Before Adjusting After Adjusting
Samsung Electronics