Honda Insight 2000 Owner's Manual page 165

Main Menu Table of Contents
Engine Oil
OIL FILTER
3. Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your
Honda dealer) is required to
remove the filter.
4. Install a new oil filter according to
instructions that come with it.
Maintenance
5. Put a new washer on the drain bolt,
then reinstall the drain bolt.
Tighten it to:
29lbf.ft (39N.m,4.0kgf.m)
6. Refill the engine with the recom-
mended oil.
Engine oil change capacity
(including filter):
2.6 US qt (2.5 , 2.2 Imp qt)
7. Replace the engine oil fill cap.
Start the engine. The oil pressure
indicator light should go out within
five seconds. If it does not, turn off
the engine and reinspect your
work.
8. Let the engine run for several
minutes and check the drain bolt
and oil filter for leaks.
9. Turn off the engine, let it sit for
several minutes, then check the oil
level. If necessary, add oil to bring
the level to the upper mark on the
dipstick.
10.Install the black cover under the
engine.
NOTICE
Improper disposal of engine oil can be
harmful to the environment. If you
change your own oil, please dispose of
the used oil properly. Put it in a sealed
container and take it to a recycling
center. Do not discard it in a trash bin
or dump it on the ground.